The intelligence layer. Powered by Sifr AI, Meezan tunes your plant to deliver the exact same cooling for fewer kilowatt-hours — automatically — and turns it into real AED savings for the owner.
Sifr AI continuously adjusts chilled-water setpoints, condenser temperatures, pump speeds and chiller staging to the real demand — never over-cooling, never wasting energy.
*Illustrative. Actual savings depend on the plant, controls and building; Meezan measures and reports real results.
Optimization happens at the building’s chilled-water plant. Meezan floats the supply setpoint up to save energy — but only as far as real-time demand allows. If residents need more cooling, the setpoint drops and savings wait.
Warmer chilled water uses far less chiller energy — but comfort sets the floor. On a peak day, delivering 21°C air may need 6°C water, so that’s exactly what we make. Here is the same target setpoint on a typical day and a peak-heat day, side by side.
Demand always takes precedence. Even when a warmer setpoint would be cheaper, if residents call for more cooling Meezan drops the setpoint to meet it — then gently resumes saving the moment demand eases. We nudge; we never compromise comfort.
Illustrative plant model (~2,000,000 kWh/yr, ~4% chiller energy per °C of setpoint reset, AED 0.30/kWh). Meezan tunes to each plant’s real limits and measures actual savings.
Move the sliders to estimate what an efficiency gain is worth on your plant.
Illustrative estimate for guidance only. CO₂ at ~0.42 kg/kWh. Meezan verifies actual savings from live meter data.
Using live meter, weather and occupancy data, Sifr AI models exactly how your building makes and uses cooling.
It resets setpoints, condenser temps, pump speeds and chiller staging in real time — always keeping comfort in balance.
Because the end-user charge is fixed, every kWh saved is margin — flowing straight to the owner, and reported transparently.